SANY 100 Ton Truck Crane (Model: STC1000T7)
Product Description
This is a used SANY 100-ton truck crane, model STC1000T7, in good working condition. It is equipped with a 7-section U-shaped high-strength steel telescopic boom with a maximum length of 64m, and a maximum lifting height of 88m with optional jib, which can meet various heavy lifting needs.
The crane adopts SANY's intelligent load moment limiter (LMI) and CAN bus control system, which can monitor the working status in real time and ensure safe and efficient operation. The hydraulic system uses a load-sensitive variable piston pump, with smooth and precise operation, energy saving and high efficiency.
The 10×6 drive heavy-duty chassis has a maximum travel speed of 80km/h and a maximum climbing degree of 40%, which is suitable for various complex construction sites. The crane is also equipped with comprehensive safety protection devices, including overload protection, height limit and outrigger interlock, to ensure safe operation.
1. Basic Product Information
| Item |
Details |
| Product Name |
SANY 100 Ton Truck Mounted Crane / Mobile Crane |
| Brand |
SANY |
| Model |
STC1000T7 |
| Origin |
Changsha, Hunan, China |
| Certifications |
ISO 9001, CE, GOST (CIS), GCC |
| Condition |
New / Used (Optional) |
| Application |
Heavy Lifting, Bridge Construction, Wind Power Installation, Port Handling, High-rise Building, Petrochemical Engineering |
2. Core Technical Parameters
2.1 Lifting Performance
| Parameter |
Value |
| Rated Lifting Capacity |
100 Tons |
| Maximum Load Moment |
4600 kN·m |
| Main Boom Configuration |
7-section U-shaped High-strength Steel Telescopic Boom |
| Maximum Main Boom Length |
64 m |
| Maximum Lifting Height (Main Boom) |
65 m |
| Maximum Lifting Height (Main Boom + Jib) |
88 m (with 24m optional lattice jib) |
| Optional Jib Length |
18m / 24m (Two-stage lattice jib) |
| Maximum Working Radius |
50 m |
| Rated Hoist Speed (Main/Auxiliary, No-load) |
130 m/min / 110 m/min |
| Maximum Slewing Speed |
2 r/min |
| Luffing Angle Range |
0° ~ 82° |
2.2 Chassis & Vehicle Parameters
| Parameter |
Value |
| Overall Dimensions (L×W×H) |
16500 × 3000 × 4000 mm (Approx.) |
| Gross Vehicle Weight |
60000 kg (Approx.) |
| Cab Capacity |
2-3 Persons |
| Chassis Brand |
SANY Special Heavy-duty Chassis |
| Drive Type |
10×6 (Five-axle) |
| Wheelbase |
1520 + 4300 + 1350 + 1350 mm |
| Maximum Travel Speed |
80 km/h |
| Maximum Gradeability |
40% |
| Minimum Turning Radius |
26 m |
| Minimum Ground Clearance |
300 mm |
| Fuel Tank Capacity |
500 L |
| Tyre Specification |
385/95R25 (14.00R25) |
2.3 Power & Transmission System
| Parameter |
Value |
| Engine Model |
Weichai WP13.530E62 / Coms (Replaced for Cums) |
| Rated Power |
390 kW (530 HP) / 1900 rpm |
| Maximum Torque |
2500 N·m / 1000-1400 rpm |
| Emission Standard |
Euro V / Euro VI (Optional) |
| Transmission |
12-speed Manual Gearbox |
| Steering System |
Hydraulic Power Assisted Mechanical Steering |
| Brake System |
Dual-circuit Air Brake + ABS + Spring Parking Brake |
2.4 Hydraulic & Control System
| Parameter |
Value |
| Hydraulic System Type |
Load-sensitive Variable Piston Pump |
| Hydraulic System Rated Pressure |
34.3 MPa |
| Control Mode |
Electro-hydraulic Proportional Pilot Control + CAN Bus |
| Outrigger Type |
H-type Full-extendable Outriggers |
| Outrigger Span (Longitudinal / Lateral) |
8.7 m / 8.5 m |
| Safety System |
SANY Intelligent Load Moment Limiter (LMI) + Height Limit + Overload Protection |
| Display System |
10-inch High-definition Intelligent LCD Monitor |
2.5 Working Condition Data (Reference)
| Item |
Typical Value |
| Total Mileage |
10000-20000 km (Used unit reference) |
| Working Hours |
4000-6000 h (Used unit reference) |
3. Key Product Features
- 7-section Ultra-long U-shaped Boom: High-strength steel boom with large section modulus, delivering 100t rated lifting capacity and 64m maximum boom length, ideal for long-distance and high-altitude hoisting.
- High-efficiency Power System: Equipped with high-power engine (Coms version optional) with strong power and low fuel consumption, meeting Euro VI emission standards.
- Intelligent Control System: SANY's self-developed LMI system and CAN bus control enable real-time monitoring of load, boom angle and working radius, ensuring safe and precise operation.
- Reliable Heavy-duty Chassis: 10×6 drive five-axle chassis with excellent passability, suitable for various complex construction sites and road conditions.
- Comprehensive Safety Protection: 12+ layers of safety devices including overload protection, outrigger interlock, anti-fall protection and emergency stop, fully guaranteeing operation safety.
- Humanized Design: Spacious cab with air conditioning, adjustable seats and ergonomic joystick layout, effectively reducing operator fatigue.
Spare Parts
Packaging & Shipping
Company Profile
